Amprobe AM-60 Compact-Digital-Multimeter - Manual (Page 8)

3
• Do not apply more than the rated voltage, as marked on Meter,
between terminals or between any terminal and earth ground.
• Do not attempt a current measurement when the open voltage is above
the fuse protection rating.
• Suspected open circuit voltage can be checked with voltage function.
• Only replace the blown fuse with the proper rating as specified in this
manual.
• Use caution with voltages above 30 Vac rms, 42 Vac peak , or 60 Vdc.
These voltages pose a shock hazard.
• To avoid false readings that can lead to electric shock and injury, replace
battery as soon as low battery indicator N appears.
• Disconnect circuit power and discharge all high-voltage capacitors
before testing resistance, continuity, diodes, or capacitance.
• Do not use Meter around explosive gas or vapor.
• To reduce the risk of fire or electric shock do not expose this product to
rain or moisture.
• Disconnect the test leads from the test points before changing the
position of the function rotary switch.
• Never connect a source of voltage with the function rotary switch in
e / G / FB A / E /Hz position.
• Do not expose Meter to extremes in temperature or high humidity.
• Never set the meter in FBA function to measure the voltage of a power
supply circuit in equipment that could result in damage the meter and
the equipment under test.
UNPACKING AND INSPECTION
Your shipping carton should include:
1 AM-60 Meter
2 Test Leads
2 Battery (SIZE AAA, 1.5V)
1 User’s Manual
If any of the items are damaged or missing, return the complete package to
the place of purchase for an exchange.