Amprobe ACD-50NAV ACD-51NAV ACDC-52NAV ACD-53NAV ACD-54NAV Navigator-Clamps - Manual (Page 22)

16
Measuring Capacitance
Set the rotary switch to the “ E “ position.
Capacitance
�
CAUTION
To avoid possible damage to the meter or to the equipment under test,
disconnect circuit power and discharge all high-voltage capacitors before
measuring capacitance. Use the DC voltage function to confirm that the
capacitor is discharged.
Note: The meter will display “diSC” while discharging the capacitor.