Step #4, Step #5, Step #6 – Mirror Image Teleprompters SP-150MP User Manual
Page 4
Step #4
Attach glass holder to the top of the pole. When attached, the glass will be tilted toward the
podium (appears to hover above the LCD).
Step #5
Slide attach rubber strip to the center edge of mirror. Place mirror into glass holder and tighten
knobs.
Step #6
Position the system near the podium. Monitor/Mirror should be start at approximately 45 degree
angle and arms length in relation to the podium. Adjust left or right as needed. Raise or lower
pole until LCD image appears in the mirror. (see cover page for example).