Step #2, Step #3 – Mirror Image Teleprompters SP-150MP User Manual

Page 3

Text mode
Original mode

Step #2

Insert pole into receiving tube at the back of the housing. Tighten knob in housing to help
prevent the pole from rotating.

Step #3

Connect VGA/Video cables and power cables to the LCD monitor, Splitter/Amplifier, and
computer. Place LCD monitor into steel housing with the screen base & buttons toward the pole
side (for SP-150 & SP-190). SP-160 & SP-220 allows the monitor to have the LCD buttons
toward the open side of the steel housing.

This manual is related to the following products:

SP-190MP SP-160 SP-160HB SP-220 SP-220HB SP-1550 SP-1950