DE DIETRICH DRS722JE User Manual
Page 11
23
D132
2. Apply joint the sealing strip as shown in figure.
4. Snap vent grille (B) and hinge cover (E) into
position.
Apply covers (C-D) on joint cover lugs and into
hinge holes.
3. Open the door and push the appliance against the
side of the kitchen unit opposite to that of ap-
pliance hinges. Fasten the appliance with 4
screws (I) provided in the kit included with the
appliance.
I
B
E
C
D
5. Separate parts Ha, Hb, Hc, Hd as shown in the
figure.
PR266
Ha
Hb
Hc
Hd
6. Place guide on the inside part of the furniture door,
up and down as shown in the figure and mark the
position of external holes. After having drilled
holes, fix the guide with the screws supplied.
21 mm
21 mm
ca. 50 mm
90
°
90
°
ca. 50 mm
7. Fix cover (Hc) on guide (Ha) until it clips into
place.
PR33
Hc
Ha