Emerson Radio MS7625BL User Manual

Page 10

PROGRAMMED PLAYBACK

This feature allows you to program up to 19 tracks on a CD to play in any order
you desire. You can program the player to skip the tracks you do not like and to
repeat the tracks you do like.

Note: The CD player must be in the Stop mode in order to enter a program in the

Memory.

1. If the disc is playing, press the STOP

button so that the total number of

tracks appears on the display.

2. Press the PROGRAM button once. The

PROGRAM LED Indicator begins to
flash, and a flashing ‘Zero’ “0” appears
in the display.

3. Press either the Skip Forward

Reverse

button to select the first

track you wish to program.
Example: Track # 7.
The selected track number flashes in
the display.

4. Press the PROGRAM button again to

enter the selected track number in the
program Memory. The track number
disappears and the flashing ‘Zero’ “0”
returns.

5. Repeat Steps 3 and 4 to continue

entering tracks in the program Memory.
You may program tracks to play more
than once, if desired. You can program
up to 19 tracks total.

6. When you have finished entering tracks in the program memory, press the

PLAY/PAUSE

button to begin programmed playback. The display will show

the track number of the first track you entered and playback will begin on that
track. The PROGRAM LED Indicator continues flashing until all the
programmed tracks have played. When the last track has played, the player
stops, the PROGRAM LED Indicator goes ‘Off’, and the display again shows
the total number of tracks on the disc.

PROGRAM