DE DIETRICH DVY1010 - Manual (Page 16)

User instructions
14
STARTING THE DISHWASHER
After carrying out all theoperations described above correctly, to start the
dishwasher simply press the START/PAUSE button (4) for a few
seconds until a beep sounds (the PROGRAM STARTED (5) light start to
flash). The 3-FIGURE DISPLAY (10) will show the duration of the
program in minutes. The duration time is only approximate, because it
depends on the washing conditions (quantity of dishes, water
temperature, etc.), and is also continually updated as the washing
program progresses.
The 3-FIGURE DISPLAY (8) shows the estimated duration of the
washing program.
If it is necessary to open dishwasher door during the washing cycle,
there will be a 1-minute delay before the program can be resumed. After
correctly closing the door, press the START/PAUSE (4) button again.
This operation may negatively affective the progress of the washing
cycle.
END PROGRAM
The end of the program is indicated by a short signal acoustic and from
the “End” visual notification on the 3-FIGURE DISPLAY (10).
By pressing the PROGRAM SELECTION button (2), the “End” visual
signal will vanish from the display and the dishwasher is ready to
continue a new cycle, the same thing happens when closing or opening
the door or by switching on-off the machine.