DE DIETRICH DVY1010 - Manual (Page 15)

User instructions
13
CHANGING THE PROGRAM
To modify the program keep the START/PAUSE button (4) pressed for a
few seconds, until the PROGRAM STARTED indicator light (5) stops
flashing, then select the new program following the instructions provided
above; press the START/PAUSE button (4) again and keep it pressed
for a few seconds, until the indicator light (5) starts to flash again.
DELAYING THE PROGRAM
(available in all programs except the soak program)
The PROGRAM DELAY button (6) can be pressed to delay the start of
the washing program by up to 12 hours. This means that the dishwasher
can be operated at the time of day of your choice.
Press the PROGRAM DELAY button (6) again; the 3-FIGURE DISPLAY
(10) will show the number of hours of delay with which the appliance will
start.
After setting the delay, start the program: press the START/PAUSE
button (4) for a few seconds, until the PROGRAM STARTED light (5)
starts flashing.
The appliance will prewash the dishes, after which the “program delay”
set previously will come into effect.
To cancel the program delay once the wash has started, proceed as
follows:
• Press the START/PAUSE button (4) for a few seconds, until the
PROGRAM STARTED light (5) stops flashing;
• Press the PROGRAM DELAY button (6) several times until the
program delay returns to zero;
• Press the START/PAUSE button (4) to start the program.