Main functions – Elation Professional PLATINUM BEAM 5R XM485-V1.0-NR User Manual

Page 14

Set Edit User Mode

Edit User Mode

Max Channel = XX
PAN = CH01

Preset User modes

Edit

Pro

gra

Select Programs

Auto Pro Part 1 = Program 1 ~ 10 Program 1
Auto Pro Part 2 = Program 1 ~ 10 Program 2
Auto Pro Part 3 = Program 1 ~ 10 Program 3

Select programs to be run

Edit

Pro

gra

Edit Program

Program 1
:
Program 10

Program Test
Step 01=SCxxx
Step 64=SCxxx

Testing program
Program in loop
Save and exit

Edit

Pro

gra

Edit Scenes

Edit Scene 001
~ Edit Scene
250

Pan,Tilt,……
--Fade Time--
--Secne Time--
Input By Outside

Save and automatically return
manual scenes edit

Edit

Pro

gra

Rec. Controller

XX~XX

Automat. scenes rec

Main Menu Functions

Main functions:

Function Mode:

“Set DMX Address” - DMX address setting – This function is used to set or adjust

the fixture’s starting DMX address. Every device controlled by DMX has to have a

unique starting address. The addressing feature is what allows DMX to function

properly. The DMX address of a fixture is what allows it to communicate with a

controller properly. The DMX addressing also allows the fixture to ignore any DMX

information coming from the controller that is not meant specifically for the fixture.

Because each fixture is connected in a daisy-chain fashion it is imperative to assign

a proper and unique starting DMX address to each and every fixture. The DMX

address is non-destructive and will remain in the fixture’s memory even when the

power to the unit is switched off. Memory is backed-up and retain by an internal

power source that should last about five years. For proper DMX addressing see

Section 10/Page 35 of this user manual.

“Value Display” - Display the DMX 512 value of each channel

With this function you can display the DMX 512 value of each channel. The display

will automatically detail the changing DMX values as they are received from the

controller.

“Set to Slave” - Slave setting for Master/Slave Operation

With this function, you can define the device as slave for operation in Master/Slave

XM485-V1.0-NR