DE DIETRICH DTE1168X - Manual (Page 14)

The appliance must be connected by an approved engineer in accordance with the
regulations in force.
The installer is responsible for the good operation of the appliance. He must explain
its operation to the user, with the aid of this manual.
The plug must be accessible after installation.
If the supply lead is damaged, it must be replaced by an equivalent lead (H07RNF
3x1,5mm²) available from the after-sales department.
It is also necessary to provide a bipolar cut-off device in your power supply circuit,
where the opening of the contacts is more than 3 mm.
A 16-ampere fuse is necessary.
Your teppan yaki uses 2.500 watts. It is therefore absolutely necessary for your
electric wiring system to be able to supply that power without danger.
Your teppan yaki MUST be connected to earth.
Cooking with the teppan yakki necessarily involves the emission of fumes. This
factor will have to be taken into account when choosing the place where your
teppan yaki is to be fitted.
IT IS ABSOLUTELY IMPERATIVE TO LEAVE A SPACE OF AT LEAST 5 CM
BETWEEN THE BOTTOM OF THE TEPPAN YAKI AND THE FIRST SHELF OF
THE KITCHEN UNIT.
DO NOT STORE INFLAMMABLE GOODS IN THE SPACE BELOW THIS
APPLIANCE.
WARNING : If the teppan yaki malfunctions in any way, unplug the appliance
or remove the fuse corresponding to the sector where the teppan yaki is
hooked up.
14
1 / INSTALLATION INSTRUCTIONS