DE DIETRICH DTi1199GE - Manual (Page 5)

EN
5
1 / INSTALLING YOUR APPLIANCE
N L
Green/yellow
Blue
Black or grey
Brown
• 220-240V
~
Warning
If the cable is damaged it must be replaced by the manufacturer, its after-sales
service or a person with a similar qualification to prevent danger.
These hobs must be connected to the mains using a socket in compliance with publication CEI
60083 or an all-pole circuit-breaker device in compliance with the installation rules in force.
When power is first supplied to your hob, or after an extended power cut, an indicator light will
appear on the control panel. This information will disappear after 30 seconds.
Connection
32A
Earth Neutral Phase
Separate the 2 phase wires (L1 and L2) before
connection.
Neutral Earth Phase
N L1 L2
Blue
Green/yellow
Black-grey
Brown
With hook-up of 400 V 2N three phase, verify
that the neutral wire is properly connected.
• 400V 2N
~
- 16A
N L
Green/yellow
Blue
Brown
32A
Earth Neutral Phase
•Hook-up of 220-240V
~