DE DIETRICH DTi1199GE - Manual (Page 12)

EN
12
2 / USING YOUR APPLIANCE
•Child safety
This functioin allows you to lock your hob
when it is shut off or when it is cooking.
To lock:
- Keep your finger on touchpad K. A beep
sounds and an indicator appears. The indi-
cator will go out automatically after a few
moments.
To unlock:
- Keep your finger on touchpad K. A beep
sounds and the indicator goes out.
Note:
- In locked mode, any action will produce a
key symbol on the display. You must unlock
your hob before using it.
- If you activate the lock while cooking, the
stop display will be prioritised on the lock.
•Clean lock
This function allows you to temporarily lock
your hob while cleaning.
To activate Clean lock:
- Your cooking hob must be turned off.
- Briefly press touchpad K. A beep sounds
and an indicator appears.
- After a predefined time, the lock will auto-
matically disengage. A beep sounds and the
indicator goes out.
•Switch
This function lets you move a pan from one
zone to another, keeping the original settings
(power level and time).
1 - Press on button O
O,, and a short beep
sounds then the pan is moved to the new
zone.
2 - Press on button H H again; the information is
displayed on the new zone. The original
cooking zone switches off when the set-
tings are displayed on the new zone.
- If there is no pan before button O O is
pressed, a long beep sounds and the func-
tion is cancelled.
- If button O O is pressed and more than one
pan is moved, the function is cancelled and
NO appears in the display.
If you move a pan from a complete cooking
zone to another complete cooking zone, the
function is cancelled and N
NO O appears in the
display.
If the “Power tracker” function activates more
than one new zone, the function is cancelled
and N
NO O appears in the display.
•Preselected power settings
This function allows you to modify the power
levels defined in the preselections (except for
the boost).
- Your cooking hob must be turned off.
- Select the preselection H to modify, by keep-
ing your finger on it.
- Set the new power setting by pressing on
touchpad G.
- A beep will confirm your action after a few
moments.
N.B. :
The power levels must be between:
- 1 and 5 for the first touch.
- 6 and 10 for the second.
- 11 and 15 for the third.