DE DIETRICH DTi1041X - Manual (Page 5)

EN
5
1 / INSTALLING YOUR APPLIANCE
DTI1041XE
Warning
If the cable is damaged it must be replaced by the manufacturer, its after-sales service
or a person with a similar qualification to prevent danger.
These hobs must be connected to the mains using a socket in compliance with publication CEI
60083 or an all-pole circuit-breaker device in compliance with the installation rules in force.
When power is first supplied to your hob, or after an extended power cut, an indicator light will
appear on the control panel. This information will disappear after 30 seconds.
Connection
N L
Green/yellow
Blue
Brown
32A
Earth Neutral Phase
N L
Green/yellow
Blue
Brown
16A
Earth Neutral Phase
DTI1041X