DE DIETRICH DTV1120X - Manual (Page 4)

EN
19
Separate the 2 phase wires (L1 and L2) before
connection.
N L
Green/yellow
Blue
Black or grey
Brown
Neutral Earth Phase
N L1 L2
Blue
Green/yellow
Black-grey
Brown
•Hook-up of 220-240V
~
Warning
If the cable is damaged it must be replaced by the manufacturer, its after-sales service
or a person with a similar qualification to prevent danger.
With hook-up of 400 V 2N three phase, verify
that the neutral wire is properly connected.
These hobs must be connected to the mains using a socket in compliance with publication CEI
60083 or an all-pole circuit-breaker device in compliance with the installation rules in force.
When power is first supplied to your hob, or after an extended power cut, an indicator light will
appear on the control panel. This information will disappear after 30 seconds.
Connection
•Hook-up of 400V 2N
~
- 16A
32A
Earth Neutral Phase
1 / INSTALLING YOUR APPLIANCE