DE DIETRICH DTiM1000C The Piano - Manual (Page 5)

EN
5
1 1 / INSTALLING YOUR APPLIANCE
•400V 3N three phase
Separate the 2 phase wires (L2 and L3) before
connection.
N Ne eu uttrra all
L Liiv ve e
N N
L L
Green/yellow
Blue
Brown
•220-240 V single phase
For a 400 V 3N three-phase connection, in the
event of problems using your hob, make sure
that the neutral conductor is properly
connected.
E Ea arrtth h
Blue
Brown
Green/yellow
E Ea arrtth h
L Liiv ve e L L
1 16 6 A A
3 32 2 A A
Green/yellow
Blue
Brown
E Ea arrtth h
Blue
Brown
Green/yellow
N Ne eu uttrra all N N
L Liiv ve e L L
Green/yellow
Blue
Black-grey
Brown
E Ea arrtth h
Blue
Brown
Green/yellow
N Ne eu uttrra all N N
L Liiv ve e L L1 1
L Liiv ve e L L3 3
L Liiv ve e
L L2 2
1 16 6 and 3 32 2 Amp fuses
6 63 3 Amp fuse.
N Ne eu uttrra all N N
1 16 6 Amp. fuse.
Black-grey
Black-grey
This hob must be connected to the mains via an accessible socket complying with publication
IEC 60083 or an all-pole circuit-breaker device complying with current installation rules.
When power is first supplied to your hob, or after an extended power cut, a code will be
displayed on the control panel. This information will disappear after 30 seconds.
Connection
Warning
If the cable is damaged, it must be
replaced by the manufacturer, its after-
sales department or a similarly qualified
person .