beautypg.com

Dimension drawings – Electro-Voice 12" Powered Subwoofer System EVID 12.1P User Manual

Page 2

background image

Architects’ & Engineers’ Specifications:

Frequency Response:

Block Diagram:

Performance Match:

EVID 3.2(t) Surface Mount Speaker

EVID 4.2(t) Surface Mount Speaker

EVID 6.2(t) Surface Mount Speaker

EVID 12.1P Part Number

301364-001

12000 Portland Avenue South, Burnsville, MN 55337
Phone:952/884-4051, Fax:952/884-0043

www.electrovoice.com

© Telex Communications, Inc. 1/2003
Part Number 38110-200 Rev A

U.S.A. and Canada only. For customer orders, contact Customer Service at:

800/392-3497 Fax: 800/955-6831

Europe, Africa, and Middle East only. For customer orders, contact Customer Service at:

+ 49 9421-706 0 Fax: + 49 9421-706 265

Other International locations. For customer orders, contact Customer Service at:

+ 1 952 884-4051 Fax: + 1 952 736-4212

For warranty repair or service information, contact the Service Repair department at:

800/685-2606

For technical assistance, contact Technical Support at: 866/78AUDIO

Specifications subject to change without notice.

Dimension Drawings:

The loudspeaker shall be a single driver system consisting of one
12-inch (300 mm) low-frequency and frequency-dividing network
installed in a vented, slot-loaded enclosure. The loudspeaker
system shall meet the following performance criteria: Amplifier
Power: 300 watts long-term program using EIA RS-426A pink
noise (6 dB crest factor). Frequency response, 42 Hz–160 Hz (-10
dB from rated sensitivity). The enclosure shall be MDF and
constructed with both glue and steel fasteners. The enclosure shall
be 16.5" (412 mm) high, 23" (584 mm) wide, 12" (305 mm) deep.
The finish shall be a paintable black or white. The grille shall be
acoustically transparent foam. The support bracket shall be low
profile and integral with the enclosure. The cabinet shall be
designed for ceiling mounting with additional accessory materials.
All standard mounting hardware shall be included for wall or corner
placement. The loudspeaker shall be the Electro-Voice ® EVID
model 12.1P.

Top View

Front View

Side View

Line

Out

Line

In

Volume

High Pass

Out

(Crossover

Frequency)

Variable

Crossover

Limiter