Epson 4SLC2-50 - Manual (Page 31)

The computer displays copyright information and then performs a
series of power-on diagnostics that check the circuit boards,
memory, ports, keyboard, and disk drives. The computer displays
several messages during the diagnostics, including this prompt:
Hit < D E L > , If
you want to run
S E T U P
If the tests indicate a problem with the system or change in
configuration, you will see an error message followed by this
prompt
RUN SETUP UTILITY
Press to RESUME
If this happens, press F1 to run the Setup program and check your
system configuration. See Chapter 5 for a complete description of
the Setup program.
When the computer completes its testing, it displays a screen
describing the system’s configuration:
If necessary, press the Pause button on the keyboard to view the
configuration screen. After viewing the screen, press any key to
continue the startup process.
1-12 Setting Up the Computer