Electrolux B8871-4 - Manual (Page 15)

15
Speedcook
After an oven function is selected, with the use of the additional
function Speedcook
the empty oven can be pre-heated in a relative-
ly short time.
1
Important: Do not put the food to be cooked into the oven, until
Speedcook is completed and the oven is operating using the desired
function.
1. Set the desired oven function (e. g. Conventional Cooking ). If neces-
sary, change the suggested temperature.
2. Press the Speedcook button.
The bars flashing one after another show that Speedcook is operating.
When the temperature set is reached, the bars of the heat indicator
light up. An audible signal sounds.
The oven now continues heating according to the pre-set oven func-
tion and temperature. You can now place the food in the oven.
3
The Speedcook function can be switched on with the oven functions
Ventitherm ® Precision Fan Cooking , MasterClass Fan Baking ,
Conventional Cooking and Rotitherm Roasting .
Oven Functions
The oven has the following functions:
Oven function Use
Heating element/
fan
Oven Light With this function you can light
up the oven interior, e.g. for
cleaning. ---
Full Width Dual
Grill For grilling flat food items in
large quantities and for toasting. Grill, top heat
Single Economy
Grill For grilling flat food items ar-
ranged in the middle of the grill
and for toasting. Grill
Ventitherm ®
Precision
Fan Cooking For baking on up to three oven
levels at the same time.
Set the oven temperatures 20-40
°C lower than when using Con-
ventional. Top heat, bottom
heat, rear wall
heating element,
fan