EdgeStar IB1000SS - Manual (Page 15)

EdgeStar Full Size Ice Maker 12
3. Remove the slideway from the water sump.
4. Find the sprinkler arm and raise it. Disconnect it from the water tube
which is connected at the back of the sprinkler arm.
5. A de-scaling solution can be prepared in a plastic basin with Nu-
Calgon Nickel-Safe Ice Machine Cleaner. Mix 4 ounces of the ice
machine cleaner per gallon of warm water.
Remove the sprinkler arm from the interior. Thoroughly clean the
sprinkler arm by soaking it in the basin filled with the de-scaling solution
until it is free of any deposit; use a soft brush to remove any thick or
stubborn residue and to help the dissolving action. Rinse under a stream
of tap water.
6. Wipe down the interior of the water sump with the de-scaling solution
and warm water. Rinse thoroughly with clear water.
7. Reassemble the sprinkler arm, slideway and row of flake covers.
8. Perform steps 1, 3, 6, 7 and 8 of the Ice Making System Cleaning
procedure below.