Encore electronic ENUWI-NX2 - Manual (Page 13)

Link Quality: Shows the link quality of the ENUWI-NX2 Wireless 802.11n with
the Access Point when operating under Infrastructure mode.
Signal Strength: Shows the wireless signal strength of the connection between the
ENUWI-NX2 Wireless 802.11n with the Access Point.
Data Rate:
Shows the statistics of data transfer, and the calculation is based on the
number of packets transmitted and received.
Configuration
This screen is where you set the basic wireless settings for the ENUWI-NX2
Wireless 802.11n.
Profile Name: Shows the Profile Name.
SSID: Service Set Identifier, which is a unique name shared among all clients in a
wireless network. The SSID must be identical for each client in the wireless
network.
Wireless Mode: There are two modes available for selection
● Infrastructure – to establish wireless communication with the LAN and other
wireless clients through the use of Access Points.
● Ad-Hoc – to establish point-to-point wireless communication directly with
other wireless client devices.
7