ESPRIT EL555 User Manual

Page 11

Text mode
Original mode

EL555 Elliptical

STEP 2: SWING ARM ASSEMBLY

1. Install the two 25m/m Wave Washers (102) onto the Left and Right side of the Handle Bar axle.
2. Slide the Left (10) and Right (11) Handle Bars onto the appropriate side of the axle. The

handlebars have a small sticker on them indicating L (left) and R (right).

3. Install two 3/8 X

mm Flat Washers (131) onto the two 3/8 X 3/4 Hex Head Bolts (76) and

install, and tighten, in the threaded holes in the ends of the axle.

4. Install the Front Handle Bar Covers (68 left, 69 right) and Rear Handle Bar Covers (68-1 left,

69-1 right) over the Handle Bar axle connections and secure with the

six

3.5x10m/m Sheet

Metal Screws (107).