SAF-HOLLAND XL-AS11011OM CBX40/CB-4000 Slider Suspension Systems - Manual (Page 10)

XL-AS11011OM-en-US Rev F · 2014-06-13 · Amendments and Errors Reserved · © SAF-HOLLAND, Inc., SAF-HOLLAND, HOLLAND, SAF,
and logos are trademarks of SAF-HOLLAND S.A., SAF-HOLLAND GmbH, and SAF-HOLLAND, Inc.
Model Identification and Nomenclature
10
8. CB-4000 Model Identification
The CB-4000 suspension serial tag is located on the rear
crossmember (Figure 12).
NOTE: Refer to the serial number tag attached to the slider
rear crossmember for information (Figure 12).
NOTE: If the suspension serial tag is not legible or is not
available, you can identify your suspension model
by the appearance of the equalizing beam. The
CB-4000 model will have a full cast beam with
no hole forward of the axle and a 5" round axle
(Figure 12).
NOTE: This manual applies to the suspension models
listed on the front cover. However, we urge you to
determine your specific model number, write that
information below and refer to it when obtaining
information or replacement parts (Figure 13).
9. CB-4000 Model Nomenclature
The sample tag illustrated will help you interpret the information
on the SAF-HOLLAND
® , Inc. serial number tag. The model
number is on the first line along with the suspension capacity.
The second line contains the part number and the serial
number (Figure 13).
CB - 4000 - 48 16
CB Slider
Axle Capacity
Suspension Series
40,000 Tandem
Slider Box Width
42" (1067 mm) Wide
48" (1219 mm) Wide
Ride Height
15.5" (393 mm)
16" (406 mm)
16.5" (419 mm)
17" (432 mm)
18" (445 mm)
Figure 13
Figure 12
CONSULT SPECIFICATION FOR CAPACITY AND RECOMMENDED APPLICATION.
MODEL NO.
PART NO.
CAPACITY (LBS)
SERIAL NO.
SAF-HOLLAND, INC.
TAG LOCATED ON
REAR CROSSMEMBER
FULL CAST BEAM