beautypg.com

Installation instructions, Sliding fifth wheel installation - ils slider, Outboard angle mounting (see figures 5a and 5b) – SAF-HOLLAND XL-FW492 FW83 and XA-231 FleetMaster LowLube Series Fifth Wheel User Manual

Page 10

background image

10

XL-FW492 Rev D

INSTALLATION INSTRUCTIONS

continued

Sliding Fifth Wheel Installation - ILS Slider

continued

Outboard Angle Mounting
(See Figures 5A and 5B):

6B - Keatley July 31

FIGURE 5B

8.25˝

(209.55 MM)

FULL REAR

FIGURE 5A

5/8˝ diameter Grade 8 bolts minimum size,
tightening torque to bolt manufacturer charts.
Hardened steel washers or flanged locknuts.
5/8˝ diameter Grade C locknuts.

The full length of the fifth wheel
mounting angle should seat flush
on the truck frame to prevent
flexing of mounting angle and
to give uniform weight distribution
along truck frame rail.

TRUCK
FRAME RAIL

HARDENED
STEEL WASHERS

This manual is related to the following products: