Epson WorkForce 310 Series - Manual (Page 6)

4
When you see this screen, select Install driver for direct USB
connection and then click Next.
5 When prompted, connect a USB cable. Use any open USB port on your
computer.
Note: If installation doesn’t continue after a moment, make sure you
securely connected and turned on the WorkForce 310 Series.
6 Follow the on-screen instructions to install the rest of the software, set up
your fax header, and register your WorkForce 310 Series.
7 When you’re done, remove the CD.
You’re ready to print, copy, scan, and fax! See your Quick Guide or on-screen
Epson Information Center.
Macintosh ®
1
Make sure the WorkForce 310 Series is NOT CONNECTED to your
computer.
2 Insert the WorkForce 310 Series software CD.
3 Double-click the Epson icon.
4 Click Install and follow the on-screen instructions.
5 When you see this screen, select Install driver for direct USB
connection and then click Next.
Need paper and ink?
Try Epson paper with DURABrite ® Ultra Ink for professional results. For the
right supplies at the right time, you can purchase them at Epson Supplies
Central
SM at www.epson.com/ink3 (U.S. sales) or www.epson.ca (Canadian
sales). You can also purchase supplies from an Epson authorized reseller. To
find the nearest one, call 800-GO-EPSON (800-463-7766).
Genuine Epson Paper
Epson offers a wide variety of papers to meet your needs; visit Epson
Supplies Central for more information.
Presentation Paper Matte
Ultra smooth, non-glare, instant-drying paper
for brochures, newsletters, and graphical presentations.
Genuine Epson Inks
Look for the numbers below to find
your cartridges. It’s as easy as
remembering your number!
Network
See your Quick Guide.
You can’t install your software as
described below.
OR
USB connection
Make sure you have a USB cable (not included).
Then follow the steps below.
USB connection
Follow these steps to connect the WorkForce 310 Series directly to your
computer using a USB cable (not included).
Windows ®
1 Make sure the WorkForce 310 Series is
NOT CONNECTED to your computer.
Note: If you see a Found New Hardware
screen, click Cancel and disconnect the
USB cable. You can’t install your software
that way.
2 Insert the WorkForce 310 Series software CD.
With Windows Vista ® , if you see the AutoPlay
window, click Run Setup.exe. When you see the
User Account Control screen, click Continue.
3 Click Install and follow the on-screen instructions.
To use the WorkForce 310 Series for faxing, connect the included phone cord
from a telephone wall jack to the
LINE port on the WorkForce 310 Series. To
connect a telephone or answering machine, see the Quick Guide for instructions.
Note: If you’re connecting to a DSL phone line, you must use a DSL filter or you won’t
be able to fax. Contact your DSL provider for the necessary filter.
Any questions?
Quick Guide
Instructions on configuring the WorkForce 310 Series for
a network, and basic instructions for printing, copying,
scanning, and faxing.
On-screen Epson Information Center
Click the desktop shortcut for easy access to the WorkForce 310 Series user’s
guide, FAQs, online troubleshooting advice, and software downloads. You can
also purchase paper and ink.
On-screen help with your software
Select Help or ? when you’re using your software.
Epson Technical Support
Internet Support
Visit Epson’s support website at
epson.com/support and select your
product for solutions to common problems. You can download drivers and
documentation, get FAQs and troubleshooting advice, or e-mail Epson with
your questions.
Speak to a Support Representative
Call (562) 276-4382 (U.S.) or (905) 709-3839 (Canada), 6 AM to 6 PM, Pacific
Time, Monday through Friday. Days and hours of support are subject to change
without notice. Toll or long distance charges may apply.
Software Technical Support
NewSoft ® America Tech Support
(408) 503-1212
Fax (408) 503-1201
[email protected]
Cut out the card to the
right and keep it with
you when purchasing
replacement ink
cartridges.
Printed in XXXXXX
6 When prompted, connect a USB cable. Use any open USB port on your
computer. Make sure the WorkForce 310 Series is securely connected and
turned on.
If you’re using Mac OS X 10.5.x, skip to step 9.
If you’re using Mac OS X 10.3.9 or 10.4.11, continue with the next step.
7
When you see this screen, click Add Printer. Follow the steps on the right
side of the screen to add the WorkForce 310 Series.
8
Click Next again, if necessary.
9
Follow the on-screen instructions to install the rest of the software and
register your WorkForce 310 Series.
10
When you’re done, eject the CD.
You’re ready to print, copy, scan, and fax! See your Quick Guide or on-screen
Epson Information Center.
Connect the phone cord
6
7
Choose your connection
Printed in XXXXXX
W ORK F ORCE ® 310 Series Ink Cartridges
Color Standard-capacity High-capacity
Black 69 68
Cyan 69 68
Magenta 69 68
Yellow 69 68
Epson is a registered trademark, Epson Exceed Your Vision is a registered logomark, and
Supplies Central is a service mark of Seiko Epson Corporation. DURABrite is a registered
trademark and WorkForce is a registered trademark of Epson America, Inc.
General Notice: Other product names used herein are for identification purposes only and
may be trademarks of their respective owners. Epson disclaims any and all rights in those
marks.
This information is subject to change without notice.
© 2009 Epson America, Inc. 2/09 CPD-27332
Color Standard-capacity High-capacity
Black 69 68
Cyan 69 68
Magenta 69 68
Yellow 69 68