Purdy PC-TFT-050VL-LED - Manual (Page 2)

Displays
Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085
Tel: 408-523-8200 • Fax: 408-733-1287 • [email protected] • www.purdyelectronics.com
02/07/11 2
PC-TFT050VL-LED
Driver Board
Power Connector (JST B2B-XH-A or compatible)
Pin No. Def. Pin No. Def.
1 +12V 2 GND
Input Connector (JST B4B-XH-A or compatible)
Pin No. Def. Pin No. Def. Pin No. Def. Pin No. Def.
1 DC +12V 2 GND 3 On/Off 4 Vbrt
Output Connector Adaptor to JST BHR-02VS-1
Pin No. Def. Pin No. Def.
1 + Anode 2 - Cathode
Connector Defi nition: CN3 - This Connector connected to key operation port of driver board.
OSD Function Description:
If you want to get the best effect, an adjustment of keyboard is required. When you fi rst press the “menu” key, OSD enter the menu
operation status (the fi rst item is pictured,) called nonadjustable status; press enter key, enter the adjustment status and you can
adjust the value of the highlight submenu item by pressing “left” or “right” key; by pressing the “enter” key again you can exit the ad-
justment status and save the value at the same time. In the nonadjustable status, pressing the “menu” key could switch menu items.
The menu items are shown as follows:
Analog VGA Input Status
Menu Item Submenu Description
Picture
Brightness Adjust the display brightness
Contrast Adjust the picture contrast
Focus Adjust the picture scan mode
Clock Adjust the clock frequency
H-Position Adjust the picture horizontal position
V-Position Adjust the picture vertical position
Color Setting
Native Setting the color temperature
C9300
C6500
User
Function
Input Signal Select the input signal source: PC-VGA; AV; S-Video; TV
Language Select the OSD language; Chinese; English
OSD H-Position Adjust the OSD display horizontal position
OSD V-Position Adjust the OSD vertical position