Purdy AND-TFT-64PA User Manual
And-tft-64pa, Features
Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085
1/28/08
Tel: 408.523.8200 • Fax: 408.733.1287 • [email protected] • www.purdyelectronics.com
1
AND-TFT-64PA
320 x 234 Pixels
LCD Color Monitor
The AND-TFT-64PA is a compact full color TFT LCD
module, that is suitable for applications such as a car TV,
portable DCD, GPS, multimedia applications and other AV
equipment. This device consists of a twisted nematic (TN)
liquid crystal cell, that incorporates a TFT-array that has
320 x 234 pixels on a 6.4 inch diagonal screen, X and Y
drivers, an LSI controller, and a built-in CCFL backlight and
inverter (with optional board.)
Features
• 6.4 inch (16 cm) diagonal screen
• Compatible with NTSC & PAL system
• High brightness CCFL backlight (300 Nits)
• Slim and compact
• Operating temperature range -20 to 70° C
• Storage temperature range -30 to 80° C
• 12V single power supply (with optional board)
• High brightness
• RoHS compliant
Mechanical Characteristics
Absolute Maximum Rating
Item
Specification
Unit
Screen Size
6.4 inch (16 cm) diagonal
inch
Surface Treatment
Anti-Glare + WV film
–
Display
Format
320 (W) x 234 (H)
dot
Active Area
129.6 (W) x97.34 (H)
mm
Dot Pitch
0.135 (W) x 0.416 (H)
mm
Pixel Configuration
Stripe
–
Outline
Dimensions
156.3 typ. (W) x 119.8 (H)
x 14.3 typ (D)
mm
Weight
235
g
Item
Symbol
Conditions
Absolute Maximum
Rating
Unit
Min.
Max.
Supply Voltage for Source Driver
Analog
V
CC
–
-0.3
+7.0
V
Digital
V
DD
-0.3
+7.0
Supply Voltage for Gate Driver
Positive
V
GH
–
-0.3
+45
V
Negative
V
GL
–
-23
+0.3
V
V
GH
V
GL
+15
+40
V
Analog input voltage (V
R
, V
G
, V
B
)
V
DD
–
-0.3
+7.3
V
Digital input signals
–
HSY, POLC, CSY, VSY, CLKC
PSI, COMPS, VIY
-0.5
+5.5
V
Digital output signals
–
-0.5
+5.5
V
Storage Temperature
–
–
-30
+80
°C
Operation Temperature
(defines that contrast, response time & other display
optical characteristics are Ta=+25.)
–
–
-20
+70
°C
Product specifications contained herein may be changed without prior notice.
It is therefore advisable to contact Purdy Electronics before proceeding with the design of equipment incorporating this product.