Emprex HD-3701P - Manual (Page 45)

44
1. Press or keys to the CHANNEL and
enter the password (Default: “0000”).
You will see three sub-menus:
 Edit
 Auto Scan
 Manual Scan
2. Press or button to highlight AUTO
SCAN and then press “OK” to launch
the auto scan. The AUTO-SCAN win-
dow shows the SCAN status.
3. The scanning will search for both NTSC
analogue and ATSC digital signals from
channel 2 to channel 69. The percentage
bar shows the progress made.
4. Once the digital TV signal is scanned,
the channel number and the program
name will be shown on the “Scan List”.
5. It takes about three minutes to complete
the scanning process.
6. When the scanning is complete, press
“EXIT” to leave this window or press
“DTV MENU” to exit the menu system.
The steps required to automatically program the product are outlined as below:
Channel Channel Caption Caption Setup Setup Lock Lock
Password
Channel Channel Caption Caption Setup Setup Lock Lock
Edit
Manual Scan
Auto Scan
Channel Channel Caption Caption Setup Setup Lock Lock
Auto Scran Auto Scran
03-0
05-0
02-1
02-2
23-0
30-3
OFF-AIR
OFF-AIR
SBC2-D1
SBC2-D2
OFF-AIR
PBS1DTV
6 channels found.
Auto Scan complete. Press (Menu) Key to exit