Fulton Performance 500320 - Manual

Jack Adapter Plate
Read, Understand, Follow and Save These Instructions
Read, understand and follow all of these instructions and warnings (Instructions) before installing and using this product. Install and use this product
only as specified in these instructions. Improper installation or use of this product may result in property damage, serious injury, and/or death. Never
allow installation or use of this product by anyone without providing them with these instructions. You must read, understand and follow all instructions
and warnings for any product(s) to which this product is used in conjunction with or installed. Save these instructions with the product for use as a
reference for any future installation and use of the product.
F3811(rev A-17251) 05/13
• Purchaser/owner must ensure that product is
installed according to these instructions. Pur-
chaser/owner must not alter or modify product.
• Operator and bystanders should never position
any part of body under any portion of this prod-
uct or the load being supported.
• Do not allow children to play on or around this
product or the load being supported.
• Never exceed maximum rated capacity. Refer to
stamped markings or decals on product to obtain
rated capacity. If uncertain, contact Cequent
Performance Products at 1-800-632-3290 or
www.cequentgroup.com
• Always replace bent, broken, or worn parts
before using this product.
• Secure the load, vehicle and trailer from rolling
(by blocking wheels) when operating or coupling
trailer.
• Before manually moving trailer, crank to lowest
position.
• Trailer jacks are designed for vertical loading.
Excessive side forces may cause jack failure and
must be avoided.
• If this product is a swivel jack, lock the plunger
pin into a hole in the mounting bracket before
raising or lowering the tongue.
• Do not attempt to weld “Bolt-on” brackets or
straps to the tongue. Special brackets are
available for “Weld-on” applications.
Failure to follow these warnings and instructions may result
in property damage, serious bodily injury, and/or death.
WARNING
Installation Instructions Warning: Failure to follow these warnings and instructions may
result in property damage, serious bodily injury, and/or death.
®
1. Block the tires of the trailer and support the trailer tongue.
2. Remove locknut from XP jack swivel assembly with 3/4” wrench (Fig. 1). Discard locknut and bushing.
3. Install the adapter plate onto the jack mount so the letters TOP are legible as shown and plate is seated into the welded mount using the new
locknut supplied (Fig. 2). Ensure adapter plate locating tabs are seated into mount holes. Tighten locknut to 65-75 ft-lbs.
4. Adjust mount height of F2 jack as needed. Refer to jack instruction sheet F3576 for details.
5. Attach the F2 jack to the adapter plate with the 3/8” cap screws and lock washers as shown. Tighten to 25-35 ft-lbs. (Fig. 3).
Limited Warranty
Limited Warranty. Cequent Performance Products, Inc. (“We” or “Us”) warrants to the original consumer purchaser only (“You”) that the product
will be free from material defects in both material and workmanship for a period of five years for Bulldog® and Fulton® products and one
year for the Pro-Series® products, ordinary wear and tear excepted; provided that installation and use of the product is in accordance with prod-
uct instructions. There are no other warranties, express or implied, including the warranty of merchantability or fitness for a particular purpose. If
the product does not comply with the applicable limited year warranty, Your sole and exclusive remedy is that We will replace the product without
charge to You and within a reasonable time or, at our option, refund the purchase price. This warranty is not transferable.
Limitations on the Warranty. This limited warranty does not cover: (a) normal wear and tear; (b) damage through abuse, neglect, misuse, or as a
result of any accident or in any other manner; (c) damage from misapplication, overloading, or improper installation, including welds; (d) improp-
er maintenance and repair; and (e) product alteration in any manner by anyone other than Us, with the sole exception of alterations made pursuant
to product instructions and in a workmanlike manner.
Obligations of Purchaser. To make a warranty claim, contact Us at 47912 Halyard Dr. Suite 100, Plymouth, MI 48170, 1-800-632-3290, identify
the product by model number, and follow the claim instructions that will be provided. Any returned product that is replaced or refunded by Us
becomes our property. You will be responsible for return shipping costs. Please retain your purchase receipt to verify date of purchase and that
You are the original consumer purchaser. The product and the purchase receipt must be provided to Us in order to process Your warranty claim.
Remedy Limits. Repair or replacement is Your sole remedy under this limited warranty or any other warranty related to the product. We shall not
be liable for service or labor charges incurred in removing or replacing a product or any incidental or consequential damages of any kind.
Assumption of Risk. You acknowledge and agree that any use of the product for any purpose other than the specified use(s) stated in the product
instructions is at Your own risk.
Governing Law. This limited warranty gives You specific legal rights, and You also may have other rights which vary from state to state. This
limited warranty is governed by the laws of the State of Michigan, without regard to rules pertaining to conflicts of law. The state courts located in
Oakland County, Michigan shall have exclusive jurisdiction for any disputes relating to this warranty.
47912 Halyard Dr. Suite 100
Plymouth, MI 48170 USA
800/632-3290
www.cequentgroup.com
Fig. 2
Jack mount
Adapter plate
Fig. 1
Remove & discard
XP Jack
Fig. 3
F2 Jack