Thermo Pride OH5-85DE - Manual (Page 3)

All installations and services must be performed by qualified service personnel.
I. FURNACE SPECIFICATIONS (SHIPPED SETTINGS)
OL SERIES
MODEL NO. OL2-56 OL5-85 OL11-105
HEAT INPUT RATE IN BTU/HR
70,000 106,250 126,000
HEATING CAPACITY IN BTU/HR
56,000 85,000 101,000
HEIGHT OF CASING 34-3/4” 43-1/4” 46-1/2”
WIDTH OF CASING 19” 25” 25”
DEPTH OF CASING 48” 50-1/4” 54-1/2”
WARM AIR OUTLET 17 x 17 20 x 20 20 x 20
RETURN AIR INLET 17 x 17 20 x 14 20 x 16
DIA. OF FLUE OUTLET 5” 6” 6”
FLOOR-CENTER OF FLUE 29-1/4” 36” 38-1/2”
FLOWRATE from .2” & .5” w.c.
EXTERNAL STATIC PRESSURE
COOLING COOLING COOLING
@2 TON SWITCH SELECTION (CFM) 800 800 800
@2-1/2 TON SWITCH SELECTION (CFM) 1000 1000 1000
@3 SWITCH SELECTION (CFM) 1200 1200 1200
@3-1/2 TON SWITCH SELECTION (CFM) 1400 1400 1400
HEATING HEATING HEATING
@70deg SWITCH SELECTION (CFM) 737 1134 1335
APPROX TEMPERATURE RISE (°F) 70 70 70
BLOWER MOTOR HP 1/2 1/2 1/2
NOZZLE SIZE .55 .75 .90
NOZZLE SPRAY ANGLE PATTERN 80º Hollow 80º Hollow 80º Hollow
LARGEST RECOMMENDED
AIR CONDITIONER
3.5 Ton 3.5 Ton 3.5 Ton
SIZE OF FILTERS 16” x 20” 20” x 20” 20” x 25”
NOTES:
1. Heating capacity based on annual fuel utilization efficiency rated by manufacturer.
2. On all outlet and inlet dimensions, the first dimension is width.
3. To permit largest recommended air conditioning (at .5 static pressure), selection of the highest motor speed is
required.
4. Electrical characteristics at 115 volts, 60 Hz., 1 phase (less than 15 amps, for all models).
5. All specifications are subject to change without notice.
1