Subaru Robin PKX201 - Manual (Page 22)

PKV101 Service
- 22 -
21. The engine is now free from the pump components for
easier servicing if necessary.
22. When reinstalling the back plate, make sure that the
weep hole points downward.
24. Reinstall and hand tighten the bolts that hold the back
plate to the engine. Inspect the sealilng washers that
are attached to the bolts. Replace as necessary if
cracked or worn.
23. Place a small amount of thread lock sealer on the tip
of the bolts before reinstallation. Note: Thread locker
Blue or Purple from Permatex© is recommended. It is
a light or medium strength, and service removable.