Emerson Radio RS1008 - Manual (Page 9)

8
POWER SOURCE
This system requires two 120V 60 Hz AC outlets.
The small plug from this AC adapter must be connected
to the DC Input Jack on the back of the Receiver/CD Player
as shown
The power source for the stereo receiver/CD player unit is
a separate AC adapter, included. This adapter is located
inside the bottom of the cabinet.
The power cord from the AC Adapter is then connected to a standard 120V 60 Hz AC outlet.
The active subwoofer has its own AC power cord that should be connected directly to a standard 120V 60 Hz
AC outlet.
Both of these AC power cords have polarized plugs with one blade wider than the other. These polarized
plugs are designed for connection to polarized AC outlets with
one wide slot and one narrow slot. These plugs can only be
inserted in polarized outlets and they will only fit one way. This
is a safety feature designed to protect you from electric shock.
If you find that the plugs do not fit in your outlets you may have
outdated non-polarized outlets. Do not try to defeat the safety
feature by filing the wider blade to make it fit, or by using an
adapter.
If the plugs of this system will not fit in your AC outlets you should contact a qualified, licensed electrician to
replace your outdated outlets with polarized AC outlets.
AC Plug
AC Outlet
DC 15V INPUT
JACK
DC 15V CABLE
AC/DC ADAPTER
AC CORD
120V / 60Hz
AC OUTLETS
RS1008_ib042303.p65 23/4/2003, 14:51 8