Select and start a washing programme – Electrolux 75011 VIL User Manual

Page 25

Programme

Degree of

soil

Type of

load

Programme description

Consumption val-

ues

ash

in wa

Intermedi

ate ri

nse

Final rinse

Drying

Duration (

inutes)

Ene

rgy (kWh)

Water (l

itres)

Any

Partial load
(to be com-
pleted later
in the day)

0,1

1) The consumption values are intended as a guide and depends on the pressure and the temperature of the water

and also by the variations of the power supply and the amount of dishes.

2) During the Auto washing programme the amount of soil on the dishes is determined by how cloudy the water

is. The programme duration, water and energy consumption levels can vary; this depends upon if the appliance
is fully or partially loaded and if the dishes are lightly or heavily soiled. The temperature of the water is
automatically adjusted between 45° C and 70° C.

3) Ideal for washing a partially loaded dishwasher. This is the perfect daily programme, made to meet the needs

of a family of 4 persons who only wish to load breakfast and dinner crockery and cutlery.

4) Test programme for test institutes.
5) This programme does not require the use of detergent

Select and start a washing programme

Select the washing programme and delay start with the door slightly opened.
The start of the programme or the countdown of the delay start will occur
only after the closure of the door. Until then it is possible to modify the
settings.

1. Check that the baskets have been loaded correctly and that the spray arms are

free to rotate.

2. Check that the water tap is opened.
3. Press the On/Off button. The dishwasher must be in setting mode.
4. Press the button corresponding to the required programme (see "Washing

programmes" chart). Close the dishwasher door, the programme starts
automatically.

Select and start a washing programme