First use, Audible signals – Electrolux 75011 VIL User Manual

Page 10

If a programme light is illuminated, the last performed programme is still set.
In this case, to return to setting mode, the programme has to be cancelled.
To cancel a set programme or a programme in progress: simultaneously press
and hold the two programme buttons positioned over the word RESET, until all the
programme button lights will illuminate. The programme has been cancelled and
the machine is now in setting mode.

Audible signals

Audible signals have been introduced to help indicate which operations the appli-
ance is performing:
• setting the water softener
• end of the programme
• intervention of an alarm due to malfunction.
Factory setting: audible signals activated.
It is possible to deactivate the audible signals, using the function buttons.

1. Press the

On/Off button. The appliance must be in setting mode.

2. Simultaneously press and hold function buttons

B and C, until the light of the

function buttons

A, B and C start flashing.

3. Press function button

C, the lights of buttons A and B turn off while the light

of function button

C goes on flashing. The digital display indicates the current

setting.

= Audible signals deactivated

= Audible signals activated

4. To change the setting, press again function button

C: the digital display will

indicate the new setting.

5. To memorize the operation, switch off the dishwasher.

First use

Before using your dishwasher for the first time:
• Ensure that the electrical and water connections comply with the installation

instructions

• Remove all packaging from inside the appliance

First use