Sandia 12-Gallon, 100 PSI Carpet Extractor - Manual (Page 6)

(6) 12-Gallon, 100 PSI Carpet Extractor 12-Gallon, 100 PSI Carpet Extractor (11)
Returned Material Authorization (RMA) Procedure
Original purchaser must contact the manufacturer to follow correct RMA/warranty
procedures. Must include a copy of RMA Sheet enclosed in the box with returned item.
No returns shall be authorized unless the proper RMA procedures are followed. It is the
responsibility of the distributor to repair the customer’s equipment as soon as possible. If
the distributor does not have the facilities to repair the equipment, it may be shipped or
taken to an authorized service center for repair.
Customer must contact the manufacturer prior to working on or changing out any
parts, etc. Manufacturer must issue an RMA Sheet containing approved labor time and
replacement parts. Do not send parts or equipment back to manufacturer without an RMA
Number and approval. No labor will be paid for, nor part costs paid for or reimbursed that
have not been previously approved by manufacturer. All warranty work must be approved
and authorized to qualify and appropriate warranty procedures must be followed.
1.0 Safety Instructions
READ THIS MANUAL BEFORE USING YOUR CARPET EXTRACTOR.
KNOW THE PROPER OPERATION, CORRECT APPLICATIONS AND THE
LIMITATIONS OF THIS EQUIPMENT BEFORE USE.
Reduce the Risk of Fire, Electric Shock or Injury:
• Use only as described in this manual. Use only the attachments recommended by the
manufacturer.
• Test all outlets with an outlet tester before plugging machine into any outlet. Plug cord
into the nearest grounded outlet.
• DO NOT unplug by pulling on the cord, grasp the plug. DO NOT pull unit by the
cord.
• Keep cord away from heated surfaces.
• Never attempt adjustments or repairs while the machine is plugged in.
• DO NOT use if cord or plug are damaged.
• DO NOT use outdoors, in standing water on wet surfaces.
• Pay close attention when using machine near children.
• DO NOT pick up flammable or combustible materials or use machine where they may
be present.
• DO NOT leave machine outdoors, in extreme heat or cold. Harsh weather elements
will damage components and void warranty.
• Lift using only the appropriate handles.
• Always wear the appropriate clothing and safety equipment when operating the
machine.
• Keep all body parts, hair and loose clothing away from openings and moving parts.
• Use extra care when cleaning stairs. Never move the machine up or down stairs with
fluid in the machine.
• Use common sense to protect yourself and others from injury when using the machine.
7.0 80-2100 Machine Parts List
Drawing No. Item ID Item Description Qty.
1 SN-12-ST-GRYGRAN 12-Gallon Solution Tank - Gray Granite 1.00
2 80-0017 Bulk Head fitting for Extractor 1.00
3 80-0017 Bulk Head fitting for Extractor 1.00
4 10-0479 1/4" Male Close Nipple 1.00
5 10-0845 1/4" Strainer for Extractor 1.00
6 SN-12-L-GRYGRAN 12-Gallon Lid - Gray Granite 1.00
7 80-0001 Extractor Exhaust Hose 0.40
8 10-0843 3/8" Black Hose for Extractor 8.80
9 10-0826 3/4" Hose Clamp for Extractor 4.00
10 80-0026 3/8 Barb x 1/4 MPT 90 Degree 2.00
11 10-0806 Barb Hose Fitting for Extractor 1.00
12 10-0379 8-32 x 3/8 Screw 8.00
13 10-0204 Motor Mount Back-Up Washer 18.00
14 10-0803 Splash-Proof Switch for Extractor 3.00
15 10-0809 Extractor 3-Hole Switch Plate 1.00
16 80-0200 Extractor Harness 1.00
17 SN-12-RT-GRAYGRAN 12-Gallon Recovery Tank - Gray Granite 1.00
18 80-0008 1.5 PVC Female Adapter 1.00
19 10-0416-A 1-1/2" Black ABS Stand Pipe 1.30
20 10-0804-A Hatch Cover Gasket for Extractor 1.00
21 10-0804 Hatch Cover for Extractor 1.00
22 10-0419-A Screw for Extractor Hatch 12.00
23 80-0012 Shut-Off Assembly for Extractor 1.00
24 10-0805 Dump Valve for Extractor 1.00
25 10-0024 1-1/2" Black Vacuum Hose 1.30
26 10-0849 1-1/2" ABS Fitting 1.00
27 10-0848-B 1-1/2" 90 Degree ABS Street Elbow 3.00
28 10-0833 Motor Manifold Bolts for Extractor 10.00
29 10-0204 Motor Mount Back-Up Washer 18.00
30 10-0811 2-Stage Extractor Motor 2.00
31 10-0838 Pigtail for Extractor 1.00
32 10-0850 Strain Relief for Extractor 1.00
33 10-0851 Strain Relief Nut for Extractor 1.00
34 10-0822 Exhaust Grate for Extractor 3.00
35 10-1030-S2 2-Stage Extractor Motor Gasket 2.00
36 SN-12-MFLD Extractor Motor Manifold 2.00
37 10-0830 Hinge Keeper for Extractor 2.00
38 10-0821 Extractor Hinge 2.00
39 10-0820 End Cap for Rod on Extractor 4.00
40 SN-12-MB-BLKGRAN 12-Gallon Motor Base - Black Granite 1.00
41 10-0836 19" Axle for Extractor 1.00
42 10-0807 Wheels for Extractor 2.00
43 10-0840 Nylon Washer for Extractor Axle 8.00
44 10-0835-N Nut for Pump Bolt on Extractor 4.00
45 10-0834 Pump Flat Washer 10.00
46 10-0808 Caster for Extractor 2.00
47 10-0816 Caster Bolt 8.00
48 10-0379 8-32 x 3/8 Screw 8.00
49 10-0400-D Latch for Extractor 1.00
50 80-0026 3/8 Barb x 1/4 MPT 90 Degree 2.00
51 80-0017 Bulk Head fitting for Extractor 1.00
52 10-0823 3/8" Barb x 3/8" Male for Extractor 2.00
53 10-0812 100 psi Extractor Pump 1.00
54 10-0835-B Pump Bolt 100 psi Extractor 4.00
55 10-0400-C Keeper Latch for Extractor 1.00
56 10-0868 1/4" Female QD for Extractor 1.00
57 10-0846 1/4" MPT Hex Nipple for Extractor 1.00
58 10-0832 S/R Strap Bolts 4.00
59 10-0831 S/R Bracket for Extractor 2.00
60 10-0818 S/R Top of Tank Bolt on Extractor 2.00
61 10-0023 Shoulder and Waist Belt Washer 4.00