Rosen Aviation 1700 Series : 17 inch SlimLine - Manual (Page 6)

17” SlimLine LCD Page 5
Pinouts
Main Interface Signal
The input connector on this monitor is a 21W4 Male Combo
D-subminiature with 17 size 20 contacts (standard density D-
sub) and four Size 8 coaxial contacts, mounting in a size 4 D-
subminiature shell.
Recommended mating connector: ITT Cannon:
P/N DCA21WA4SA197FO.
Note: Backshell of main connector is chassis ground.
1 28V Return
2 +28 VDC
3 IR +5VDC
4 IR Signal
5 Reserved
6 RGB/Video Select Switch
7 Power On/Off Status (output)
8 H-Sync
9 V-Sync
10 28V Return
11 +28VDC
12 IR GND
13 Computer Sync GND
Warning!
Do Not Plug or Unplug Monitor
Connector While Power is Applied
MATING CONNECTOR LOADING VIEW
Pin Display Signal
Pinouts