Rose Electronics CrystalLink USB 2.0 Fiber - Manual (Page 6)

2 Installation and Operations Manual
Features

Supports USB 1.1 (low and full speed) and USB 2.0 (high-speed)

Supports USB 2.0 and USB 1.1 host computer systems
(EHCI / USB 2.0 – OHCI/UHCI USB 1.1)

Extends USB devices up to 1640 feet (500m-Mulitmode model) or
6 miles (10 Km-Singlemode model).

Four USB port on the receiver unit

Standard USB hubs can be used to increase the number of connected
USB devices (up to 14 devices, including 3 USB hubs.

Up to 500 ma of power is available at each USB port for powering high-
power USB devices

Transmitter and receiver have an optional earth ground connection point

Plug-and-Play installation , no configuration or set-up needed

Operating system independent, supports all major operating systems
Package contents
The package contents consist of the following:
 The CrystalLink USB 2.0 transmitter and receiver units
 Power adapter for the remote unit. (Auto-switching transformer)
 Installation and operations manual CD.
Fiber and USB cables are usually ordered separately. If the package
contents are not correct, contact Rose Electronics or your reseller, so the
problem can be quickly resolved.
Rose Electronics web site
Visit out web site at www.rose.com for additional information on the
CrystalLink USB 2.0 Fiber extenders and other products that are designed
for data center applications, classroom environments and other applications.
About this manual
This manual covers the installation and operation of the CrystalLink USB 2.0
Singlemode and Multimode Fiber extender.