Rose Electronics CrystalView DVI Fiber - Manual (Page 26)

Appendix C. Rackmount Kit
Rack mounting the CrystalView DVI Fiber uses the rackmount kit part number
RM-BR3. You can mount 1 to 4 units on a single shelf and mount the shelf in
a standard 19” rack.
The units can be orientated on the rack with either the front or rear panel
facing to the front or rear of the shelf. Mounting holes in the bottom of the
shelf will lineup with the holes in the bottom of the unit.
Provide adequate strain relief for all connected cables to avoid excess tension
on the connectors.