Rose Electronics CrystalView DVI Fiber - Manual (Page 15)

CRYSTALVIEW DVI FIBER INSTALLATION AND OPERATIONS MANUAL
11
Diagnostic LED Indicators
Power (Red)
 Off – No power applied, device not ready
 On- Power applied, device ready
Data Error (Green)
• Off - No errors, device ready
• Blinking / On – Transmitter / Receiver communication not established
Link Status (Green)
• Blinking – No Fiber cable connection detected
• On – Transmitter / Receiver communication established, device ready
Video OK (Green)
• Off – No video signal detected
• On – Video signal detected, device ready
POWER DATA ERROR STATUS
VIDEO OK