Rose Electronics CrystalView DVI Micro DL - Manual (Page 5)

Specifications
Resolution 3840 x 2400 (WQUXGA), 1920 x 1200 (WUXGA) and 1080p Full-HD
Video Bandwidth 3.5Gbps / channel
Maximum Pixel Clock Single link (225Mhz) / Dual link (2 x 165Mhz)
Connectors a) DVI-D 24 pin male video connector
b) SC type female fiber connector
Power 100 – 240 VAC – 5VDC, 2A. 1.0W Max (Transmitter or Receiver)
Transmitter: optional +5V / 2A adapter. Receiver: +5V / 2A adapter
Dimensions
(W x D x H)
2.98 x 1.97 x 0.6 inches
75.6 x 50 x 15.0 mm
Environmental
Operating Temp
Storage Temp
32°F - 122°F (0°C - 50°C)
-4°F - 158°F (-20°C - 70°C)
Approvals CE, FCC, RoHS
Optical Characteristics
Source 850nm VCSEL
O/E Converter Pin Photo Diode
Input/Output Signal TMDS (DVI 1.0 standard)
Recommended Cable Type 2-channel 50/125um SC type multi-mode fiber
Part Number
CRK-T1DFMDM-DL CrystalView DVI Micro Extender-Dual Link
CAUTION
Use only the included DC adapter (5V, 2A) for the receiver unit. The transmitter
uses the computer power. No external DC adapter is required for the transmitter. Some
computers cannot supply sufficient power to the transmitter. In this case, use the external DC
adapter for the receiver.