Rose Electronics CrystalView EX5 DVI - Manual (Page 9)

CrystalView EX5 Installation and Operations Manual 5
Transmitter - Front Panel
Indicator Description
Power
(Green LED) On = Ready / Off = No power /
Link
(Green LED) On = Valid Link between Transmitter and Receiver
Off = No Link
USB
(Green LED) On = Properly enumerated on host computer
Off = No Link
Blinking = host is in suspend mode
Video
(Green LED) On = Valid HDCP activity between the Transmitter
and host computer
Off = No Video activity
Blinking = Normal video is being transmitted
between the Transmitter and Receiver
Transmitter - Rear panel Connectors
Connector Description
DVI-D In DVI-D Video Input from Host computer (Supplied)
Config Reserved for company use only
USB Type B USB input from Host computer (Supplied)
Link (RJ45) Connection for a CAT5e or better cable to the
Receiver unit
Power +5V, 3A power adapter (Supplied)
Table 1. Transmitter Indicators/Connectors