Rose Electronics CrystalView USB2 - Manual (Page 6)

2 CRYSTALVIEW USB2 INSTALLATION AND OPERATINS MANUAL
Features

Supports USB 1.1 (low/full speed) and USB 2.0 (high-speed) devices

Extend single, dual, or quad video and USB 1.1 or 2.0 peripherals up
to 150 ft (50m) from a USB 2.0 compliant CPU using CATx cable

CD quality audio available on the single or dual video models

Cable length compensation adjustments (Equalization and gain) are
automatically performed

Video equalization and gain can be fine tuned using simple keyboard
commands

Automatic video skew adjustments (optional)

VESA enhanced DDC enables plug-and-play capability

Supports:

SVGA, VGA, XGA, RGB video modes

Single, Dual, or Quad head VGA video models

USB or PS/2 keyboards and mice

USB 2.0 high-speed peripherals

Video resolutions up to 1920 x 1200 @ 60Hz

Up to 500 ma of power is available at each USB port for powering
high-power USB devices

Operating system independent

Made in USA
Cable Requirements
Video source to Transmitter HD15M to HD15M
USB source to Transmitter
USB Type A M to USB Type B F
Transmitter to Receiver CATx cable terminated with RJ45M
Compatibility
Computer – EHCI (USB 2.0) host controller
OHCI/UHCI (USB 1.1) host controllers is not supported
USB Devices – Most USB devices that comply with USB standards
Monitors – SVGA, VGA, XGA, RGB
Package Contents
Transmitter / Receiver Units
Power adapters (2)
Installation and Operations manual
Rose Electronics Web Site
Visit our web site at www.rose.com for additional information on the
CrystalView USB2 and other products designed for data center
applications, classroom environments, and many other applications.
Register your product at www.rose.com/htm/online-registrationform.htm