Appendix c – rack mounting – Rose Electronics Vista DVI User Manual
Page 14
10
Installation and Operations Manual
Appendix C – Rack mounting
The Vista DVI can be mounted in a standard 19” rack. To mount the unit in
a rack, secure the included rack mounting brackets to the front sides of the
unit. Mount the unit in your 19” rack and secure the rack mount brackets to
the rack rails.
Observe proper cable strain relief procedures to eliminate excess strain on
the connectors.
See also other documents in the category Rose Electronics Communication:
- Orion XC (58 pages)
- Orion XC (120 pages)
- Orion (60 pages)
- Xtensys (20 pages)
- Xtensys (16 pages)
- Xtensys (50 pages)
- MultiStation CATx (16 pages)
- MultiStation (36 pages)
- ClassView (36 pages)
- ServeView Pro (36 pages)
- Vista DVI Plus (24 pages)
- MultiVideo (60 pages)
- UltraConsole Remote 2 (68 pages)
- UltraMatrix Remote 2 (70 pages)
- UltraView Remote 2 (58 pages)
- UltraMatrix AV DVI 16 (20 pages)
- UltraMatrix AV VGA 16 (20 pages)
- Vista Remote 2 (72 pages)
- UltraMatrix AV DVI 4 (20 pages)
- UltraLink 2 (56 pages)
- UltraMatrix AV DVI 8 (20 pages)
- Vista AV (16 pages)
- CrystalLink USB 2.0 CATx (12 pages)
- CrystalLink USB 2.0 CATx (16 pages)
- CrystalLink USB 2.0 CATx (16 pages)
- CrystalLink USB 2.0 CATx (16 pages)
- CrystalLink Audio (2 pages)
- CrystalLink USB 2.0 Fiber (16 pages)
- CrystalLink USB 3.0 (20 pages)
- CrystalLink Serial (4 pages)
- Porter (40 pages)
- VISTA L-SERIES (52 pages)