Rose Electronics Vista DVI - Manual (Page 10)

6 Installation and Operations Manual
The following table lists the keyboard commands to select a PC port, bind or
unbind the audio or USB hub, scan the PC ports, and define the hotkey
sequence. If the hotkey sequence (scroll lock + scroll lock) has been
changed, use the changed hotkey sequence to invoke the commands.
Keyboard commands
Command Hotkey sequence
Select PC Port [ScrLK] + [ScrLK] + [x]
x= Port # (1-8)
Next lower PC port [ScrLK] + [ScrLK] +
Next higher PC port [ScrLK] + [ScrLK] +
Previous PC port [ScrLK] + [ScrLK] +
Bind PC & Audio/Mic [ScrLK] + [ScrLK] + Q
Unbind PC & Audio/Mic [ScrLK] + [ScrLK] + W
Bind PC & USB Hub [ScrLK] + [ScrLK] + Z
Unbind PC & USB Hub [ScrLK] + [ScrLK] + X
Select Audio/Mic port [ScrLK] + [ScrLK] + A + y
y= Port # (1-8)
Select USB Hub port [ScrLK] + [ScrLK] + Fx
Fx= Function key 1-8
Autoscan [ScrLK] + [ScrLK] + S
Autoscan with delay time [ScrLK] + [ScrLK] + S + z
z= 0-9
1= 10 sec; 2= 20 sec;
3= 30 sec; 4= 40 sec;
5= 50 sec; 6= 60 sec;
7= 70 sec; 8= 80 sec;
9= 90 sec; 0= 100 sec
Stop autoscan Press any key
Define hotkey sequence [ScrLK] + [ScrLK] + H + y
y= Scroll lock; Caps lock;
Num lock; Esc; or F12
Toggle Beep sound ON/Off [ScrLK] + [ScrLK] + B