Rose Electronics MultiStation CATx - Manual (Page 6)

2 MULTISTATION CATx INSTALLATION AND OPERATIONS MANUAL
Features
 Available in automatic skew and non-skew models that connect to
computers with PS/2 keyboard and mouse ports, computers with USB
keyboard and mouse ports, or KVM switches.
 USB models access the computer simultaneously, PS/2 models have a 2
second lockout before the not in use KVM can have access.
 Extend two KVM station from a CPU using CATx cable
(For CATx cable distances greater than 100’, it is recommended that the
skew model be used)
 Resolution up to 1920 x 1440
 MultiStation CATx uses a microprocessor to emulate the keyboard and
mouse for plug and play operation. The keyboard and mouse on the
receiver Unit do not have to be connected for the PC to boot; only the
transmitter Unit must be connected to the PC
 Compatible with Rose Electronics family of KVM switches such as
ServeView Pro, UltraView Pro and UltraMatrix
 Operating system independent
 Status indicator LEDs on each RJ45 connector
 All settings and video tuning are performed automatically. No user
adjustments are needed to achieve a crystal clear display on the receiver
KVM monitor. (Manual adjustments are available using special keyboard
commands)
Package contents
The package contents consist of the following:
 The MultiStation CATx transmitter and receiver units as ordered
 Two (2) power adapters for receiver Units
 Installation and operations manual CD
CATx and other cables are usually ordered separately. If the package
contents are not correct, contact Rose Electronics or your reseller, so the
problem can be quickly resolved.
Rose Electronics web site
Visit out web site at www.rose.com for additional information on the
MultiStation CATx and other products that are designed for data center
applications, classroom environments and other applications.
About this manual
This manual covers the installation and operation of the MultiStation CATx
models.