ROCKINGER RO 805 B - Manual (Page 12)

ROCKI NG E R
Member of JOST-World
13
GB
1 1.. F Fiittttiin ng g R RO O i i 8 80 05 5 B B
Fig. 1
1. Installation
The coupling is supplied in a ready-to-use condition.
x The coupling is fastened with 4 hex bolts and self-locking nuts or
nuts with a suitable lock of quality 8 on a base plate with a smooth
surface and the corresponding hole pattern.
Tightening torque: 135 Nm / 210 Nm
Note:
Any bolt and nut qualities specified by the vehicle
manufacturer in deviation from this must be observed.
Attention: Only use a ROCKINGER one-handed pin in accordance
with the model approval. Failure to observe this will cause the
model approval to lapse.
Article no. Hole pattern Bolt Quality DIN Tightening
ROCKINGER size torque
805 B 3000 C 120 x 55 M 14 8.8 931 135 Nm
805 B 4000 C 140 x 80 M 16 8.8 931 210 Nm
!