Emerson SB325 - Manual (Page 16)

15
TV and Optional Component
Connections
Required cords
Video cord for connecting a TV set (included).
Audio cords (included).
When connecting a cord, be sure to match the color-coded
pins to the appropriate jacks on the components.
Notes:
TV Connection-Normal (Connection Cable Included):
To view the video from DVD discs on your TV set connect
the Video Out jack of this system to the Video ln jack of
your TV set. The Video jacks are usually colored yellow. Use
the included video cable with yellow plugs on each end.
TV Connection-Audio (Connection Cables Not Included):
Connect the Left/Right audio output jacks of your system to
the Left/Right audio input jacks of the TV set.
VCR Connection-Audio (Connection Cables Not
Included):
To listen to the sound from your stereo VCR through the
speakers of this system, connect the Left/Right audio output
jacks of your stereo VCR to the Left/Right audio input jacks
(VIDEO (AUDIO) INPUT) of this system.
External Decoder Connection-Not Required:
The Coaxial Digital Audio output jack allows digital audio
signals to be fed to an external Dolby Digital or DTS
decoder if desired. The Coaxial digital audio connection
cable is not included.
Basic Connection Diagram:
The diagram below represents a typical connection. In the
diagram you can view the picture from DVD movie discs
on your TV set. You can also play the sound from your
stereo TV set and the sound from your stereo VCR through
the speakers of this system.
Connecting the AC Power Cord
Notes:
The Power Requirement is: AC 120V, 60Hz.
Connecting to power other than the one listed above may
damage the system or cause abnormal operation.
Before connecting the AC power cord of this system to a
wall outlet, connect the speakers and other component
cables to the system.
Connect the AC power cords of your TV and any optional
connect to a wall outlet.