RISCO Group GT480 User Manual
Page 19
P
P
P
P
a
a
a
a
g
g
g
g
e
e
e
e
1
1
1
1
7
7
7
7
3)
Walk around the area being tested. As each device is
operated, there will a tone from the internal sounders and
the display will show the triggered circuit.
4)
To test the bells (external sounders) and strobe press 9.
To stop the bell test press 9 again.
5)
To escape back to Unset press 0 three times.
Turning Chime On/Off
Your installation company may have programmed the system so that a
chime tone sounds when certain doors are opened, or a detector is
triggered. This Chime function may be turned on or off by the User.
1)
Enter a valid Master User Code
followed by No (
).
The display will show:-
2)
Press No (
).
The display will show:-
3)
Press No (
).
The display will show:-
4)
Press Yes (
).
The display will show:-
Press Yes (
)again.
5)
The current Chime Mode will be displayed. Use the No (
)
key to change it to the mode you require. When finished
press 0 three times to return to the Unset mode.
Do You Want to. .
Test ?
Do You Want to. .
Delete Zone ?
Do You Want to. .
Select Options ?
Do You Want to. .
Program Chime ?
GardTec 480 User PR5831_11 5IN480UM_B A6 booklet.qxd 19/07/2007 17:18 Page 17