Primare CD32 CD player - Manual (Page 3)

C d 3 2 u s e r g u i d e
3
1 u n p a C k t h e C d 3 2
Your CD32 is supplied with the following
components:
• Mains cable.
• C23 remote control.
• Two batteries for the remote control.
If any of these items are missing please contact
your supplier. We recommend you retain the
packaging in case you need to transport the unit
at a later date.
2 C o n n e C t t o a n
a m p l i f i e r
Analogue outputs
The analogue output provides for both the
recommended balanced XLR outputs and the
conventional unbalanced RCA for connection with
an appropriate stereo amplifier or preamplifier.
• Connect the appropriate outputs to your
amplifier or preamplifier using a suitable cable.
Digital outputs
Alternatively the CD32 Compact Disc Player
provides one SPDIF, one TOSlink, and one
AES/EBU digital output for connection to a digital
preamplifier or digital surround processor.
• Connect the appropriate output to your
preamplifier or surround processor using a
suitable cable.
3 C o n n e C t p o W e r
• Plug one end of the mains cable supplied with
the CD32 into the power connector on the
back panel, and connect the other end to a
wall socket.
If this cable is not suitable for your power outlets
please contact your supplier for an alternative
cable.
Note: See Phase, page 8, for information about
getting the best sound from your CD32.
 WARNING: Always disconnect the
CD32 from the mains power before
connecting or disconnecting any cables.
• Switch on the CD32, using the switch on the
back panel.
The standby indicator will light up on the front
panel.
To switch on from standby
• Press the O button on the front panel or
remote control.
The display shows:
PRIMARE
Press the O button again to switch to standby.
4 p l a y a C d
• Press the */å button on the front panel or
remote control to open the tray.
• Place the CD in the tray with the label facing
upwards.
• Press the > button on the front panel, or the
>/= button on the remote control, to close
the tray and start playing the disc.
For more information about playing a CD see the
next page.
For more information about playing music files
from a USB disk see
Playing music files from a
USB disk, page 7.
getting started
Set up your CD32 in four simple steps: