Primare BD32 universal player - Manual (Page 4)

B d 3 2 Q U I C K S E T U P g U I d E
Back panel connections
Analogue
video outputs
RS232 HDMI USB e-SATA HDMI Optical Coax Network RF
Not active
Power
On/off
2-channel
balanced outputs
2-channel
outputs
Balanced
digital output
Trigger
in/out
IR
in/out
Multichannel audio outputs
Digital outputs
Unpack the BD32
Your BD32 comes with:
• This Quick Setup guide.
• The User Guide in PDF format on CD-ROM.
• AC power cord
• C23 remote
• 2 batteries for the C23
• USB wireless adaptor
• USB extension cable
Phase
The phase of the AC supply can make a significant
difference to the sound.
Ensure that the live pin of the AC power cable
is connected to the left-hand pin of the power
connector, viewed from the back panel:
Live
IMPORTANT!
Positioning the BD32
As the power supplies are completely linear, they
can generate a lot of heat.
In order to avoid the appearance of venting ducts,
which would interrupt the clean lines of the BD32
design, we’ve opted to use the player’s entire
aluminium chassis as an active heat sink.
The underside of the player may therefore feel hot,
which is completely normal and expected.
However, we do recommend you to position the
BD32 in a well ventilated place and not in a closed
non-ventilated environment.
Do NOT place the BD32 directly on or underneath
another component.