Primare BD32 universal player - Manual (Page 2)

B d 3 2 Q U I C K S E T U P g U I d E
2
Switch on/off
Play or press and hold to pause the disc
Press and hold for 6 seconds with the
tray open to reset the remote code
Increase volume of amplifier
Select Blu-ray mode
Press and hold for 1.5 seconds to select a source
Restart the current track,
or skip to the previous track
Repeat the track or disc Show/hide on-screen display
Skip to the next track
Return from menu
Display Pop-up Menu/DVD Menu
Change the display brightness
Choose audio language/track
Reverse scan Forward scan
Display Top Menu/Title Menu
Choose camera angle
Choose media source
Choose output resolution
Choose subtitles
Zoom in/out and adjust aspect ratio Play from specified location
Select SHUFFLE or RANDOM
Open or close the tray, or stop the disc
Decrease volume of amplifier
Clear numeric input
Display the Setup Menu
Move right on menu
Move up on menu
Move down on menu Select item on menu
Move left on menu
Enter track number
USIng ThE REmoTE ConTRol
This page explains how to use the C24 remote control to operate the BD32, and
how to fit the batteries into the remote control.
When using the remote control, the front window of the remote control should
be pointed to the infrared sensor on the front panel within an angle of ±30° and
a range of about 26 ft.
NOTE: When a button is pressed but its function is invalid or unavailable at the
moment, the TV screen displays a circle with a diagonal line.
Fitting the batteries
Before using the remote control you need to insert
the two button cells supplied with the C24.
• Open the cover on the back of the remote
control by pressing the tab gently:
• Insert the two batteries, positive side
uppermost:
+
CR2025 LITHIUM BA
TTERY 3V
+
CR2025
LITHIUM BA
TTER
Y
3V
•
Replace the cover and push until it clips into
place.
 Note: Replace only with 3V button
cells type CR2025 or equivalent.
When disposing of old batteries please be
considerate to the environment.